- Karolo ea Mocheso-Sensor
- Li-Sensors tsa Mocheso oa Motlakase oa Indasteri ea Likoloi
- Mekhoa e Tloaelehileng ea Mocheso oa Mocheso oa Indasteri
- Mohatelli oa Khatello
- Transmitter ea mocheso
- Transmitter ea mocheso le mongobo
- Li-sensor tsa mocheso oa ho tsoa ha koloi
- Li-sensor tsa mocheso oa indasteri ea bongaka
- Sensor e bohlale ea mocheso oa lapeng
01
Phetisetso ea Mocheso le Phetoho ea Mojule
Likaroloana
1. Imported konokono, ho ea ka kopo ya mefuta e fapaneng ya melao-motheo ea chip ho khetha.
2. Tlhahiso ea boikhethelo: 4-20mA, RS485, joalo-joalo.
3. Botsitso bo botle ba nako e telele, ts'ebetso e babatsehang ea ho thibela ho kena-kenana, joalo-joalo.
4. Fumana ROHS le CE setifikeiti.
Kopo
Keke ea polokeho ea ho itšehla thajana ea mocheso o bohlale (thermocouple, thermal resistance input) bakeng sa thermocouple, ho hanyetsa mocheso kapa matšoao a mang a millivolt libakeng tse kotsi tsa tšimo.
Kenyelletso, kamora ho itšehla thajana, e fetoloa hore e be sephetho se tloaelehileng sa lets'oao la DC sebakeng se sireletsehileng sa taolo.
Sisteme kapa sesebelisoa se seng. Ke keriti e bohlale ea phetisetso ea mocheso ea ho itšehla thajana, e.
Sehokelo sa USB, thermocouple e kenang e ka hlophisoa ke PC le software ea taolo.
Mefuta le mefuta ea mefuta, 'me tekanyo ea zero le e feletseng ea lets'oao la tlhahiso e ka hlahlojoa.
Kanale e le 'ngoe, tlhahiso e le 'ngoe, tlhahiso e le 'ngoe. Fense ea tšireletso ea ho itšehla thajana e ikemetse.
Litsela tsa ho kenya / lihlahisoa / tsa matla li arotsoe ho tse ling ka matla a DC.
Technique parameter
● Phepelo ea motlakase
Matla a phepelo ea motlakase: 20 ~ 30VDC
Matla a phepelo ea matla a lekantsoeng: 24VDC
Tšebeliso ea hajoale (phepelo ea matla a 24VDC):
● Kenyo e tsoang sebakeng se kotsi
(E ka hlophisoa ke PC le software programming)
Ho hanyetsa mocheso: Pt100, Cu50, joalo-joalo
Boemo ba mocheso: ho latela mofuta oa sensor e hokahaneng (sheba tafole ea mefuta)
Kenyeletso ea lets'oao la khetho ea millivolt: ± 80mV
Maemo a fokolang a millivolt: 5mV
● Sehlahisoa sebakeng sa polokeho
Nako ea tlhahiso: 4 ~ 20mA; Tse ling tse boletsoeng esale pele
Phallo ea motlakase: 1 ~ 5V; Li-voltage tse ling tse boletsoeng
Khanyetso ea mojaro: 4 ~ 20mA tlhahiso, ≤350Ω (fektheri ea kamehla, e ka hlakisa mojaro)
● Mekhahlelo e akaretsang e akaretsang
Ho nepahala ha matšeliso a batang: ±1 ℃ (marang-rang a matšeliso -20 ℃~+60℃)
(Cold end resistance e kentsoe ka har'a marang-rang a tšireletso a ikhethileng)
Mocheso oa ho hoholeha: 0.01%FS/℃
Nako ea karabelo:
Matla a ho itšehla thajana: pakeng tsa ho kenya letsoho - tlhahiso - phepelo ea matla 2.5KV, 1min, 50Hz
Insulation resistance: Ho kenya, tlhahiso le matla ≥100MΩ / 500VDC
Nyeoe ea thepa / Kereiti ea ts'ireletso: ABS/IP20 e thibelang malakabe
Litekanyo: 16×116×110(mm)
Mocheso o sebetsang: -20 ℃ ~ +60 ℃
E sebetsa ho lisebelisoa tsa tšimo tse hokahaneng le libaka tse kotsi: mocheso oa thermocouple
Sensor. Sebaka sa 0, sa 1, sa 2; IIA, IIB, IIC libaka tse kotsi
● Litekanyetso tsa setifikeiti sa tšireletso se thibelang ho phatloha
Letšoao la kereiti e sa phatloheng: [Exia Ga]IIC
Mekhahlelo ea setifikeiti sa tšireletso: Um = 250VAC/DC Uo = 10.5VDC Io =5mA
Po = 13.2W Lo = 100mH Co =1.7μF
Setšoantšo sa Khokahano ea Terminal
